MUCKYNUTZ Face Fender - Mini

MUCKYNUTZ Face Fender in Size mini

A scaled-down version of the face fender, the Mini is designed to fit your Road bike, Gravel bike and some children's bikes. 

Features

• Stops muck and spray being flung up into your face at speed.
• Can be used on all wheel sizes.
• Discreet and very effective.
• Weighs just 15g.
• Attaches using the supplied Velcro or zip-ties, making it easy to fit.
• Compatible with disc brakes, and some V brake designs*.
• Easy to clean as it's flexible and opens flat. Simply wipe it and you're done.
• Made in the UK from recyclable material.

*V-brakes? You may have to trim the front section down to avoid fouling on rim brake calipers. Please ask for advice before purchasing if you have any doubts.

Sustainability
It's no secret that plastic is used in most of our products, and this is simply because it's the best material for the job.

As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal waste, minimal packaging and we recycle everything we can along the way. Each product is designed to serve its purpose over many years and is by no means a single-use plastic. When a Mucky Nutz product does eventually reach the end of its functional life, it can be fully recycled and we encourage all customers to do so.

Dimensions
Length: 180mm
Width: 203mm
Mass: 15g

Installation
We are currently working on updating the fitting instructions across all our products. In the meantime, please follow the steps below. If you need assistance give us a call.

1. Take the Velcro roll and wrap it around a fork leg so it overlaps by an inch or so. Cut off the length and repeat the process for the other leg.
2. Do the same for the fork bridge. You will end up with four lengths of Velcro.
3. Take the fender and break off the hanger tab (use scissors for a clean edge). Thread the Velcro through the 'arm' holes (fluffy side to the fork) and repeat the process for the two bridge holes.
4. Position the fender to the underside of the fork bridge and tighten the top two Velcro straps around the bridge so it pulls up flush then tighten the lower arms around the fork lowers.
5. Square the shape up and check clearance. Tweak if needed. Otherwise, go find the mud.